Tyvek / Tyvek® 500 Labo

TYCHF7SWH00

Tyvek® 500 Labo

DuPont™ Tyvek® 500 Labo. Hooded coverall and attached slip-retardant overshoes. Dias internal seams. Tunnelled elastication at wrists, ankles and face. Elasticated waist (glued-in). Tyvek® zipper and flap. White.

 
 
 
Hover over image to zoom

CAT III

T5

T6

EN 1073-2

EN 1149-5

EN 14126

Name Description
Full Part Number TYCHF7SWH00
Fabric / Material Tyvek® 500
Design Hooded coverall with attached slip-retardant overshoes and elastics
Seam Stitched (internal)
Color White
Sizes SM,MD,LG,XL,2X,3X
Quantity/Box 25 per box, individually packed.

FEATURES & PRODUCT DETAILS

DuPont™ Tyvek® 500 Labo. Hooded coverall with attached, slip-retardant overshoes. Available in white in sizes SM to 3X. Robust yet lightweight (<250g per garment). 3-piece hood and gusset for improved fit. Elasticated face, wrists and ankles as well as glued-in waist elastic.
Tyvek® garments are composed of flash spun high density polyethylene, providing an ideal balance of protection, durability and comfort. Tyvek® is permeable to both air and water vapour, yet repels water-based liquids and aerosols. It offers an excellent barrier against fine particles and fibres (down to 1 micron in size), is ultra-low-linting and antistatically treated. Silicon non-added.
Applications include the pharmaceutical industry, laboratories, cosmetics, optical and electronics.

  • Certified according to Regulation (EU) 2016/425
  • Chemical protective clothing, Category III, Type 5 and 6
  • EN 1073-2 (protection against radioactive contamination)
  • Antistatic treatment (EN 1149-5) - on both sides
  • Stitched internal seams to help reduce contamination from the inside to the outside of the garment
  • Attached overshoes consisting of garment material with friction-coated sole to provide added slip-resistance
  • Tyvek® zipper and zipper flap for enhanced protection

SIZES

Fabric & Permeation/Penetration Data

Physical Properties

Data relating to mechanical performance of the fabrics used in DuPont chemical protective clothing, listed for the selected garment according to the test methods and relevant European standard, if applicable. Such properties, including abrasion and flex-cracking resistance, tensile strength and puncture resistance can help in the assessment of protective performance.

Property Test Method Typical Result EN
Abrasion Resistance 7 EN 530 Method 2 >100 cycles 2/6 1
Basis Weight DIN EN ISO 536 41.5 g/m2 N/A
Bursting Strength (Mullenburst) ISO 2758 280 kPa N/A
Colour N/A White N/A
Exposure to high Temperature N/A Melting point ~135 °C N/A
Exposure to low Temperature N/A Flexibility retained down to -73 °C N/A
Flex Cracking Resistance 7 EN ISO 7854 Method B >100000 cycles 6/6 1
Flex Cracking Resistance at -30°C EN ISO 7854 Method B >4000 cycles N/A
Puncture Resistance EN 863 >10 N 2/6 1
Resistance to Water Penetration DIN EN 20811 >10 kPa N/A
Surface Resistance at RH 25%, inside 7 EN 1149-1 < 2,5 • 109 Ohm N/A
Surface Resistance at RH 25%, outside 7 EN 1149-1 < 2,5 • 109 Ohm N/A
Tensile Strength (MD) DIN EN ISO 13934-1 >30 N 1/6 1
Tensile Strength (XD) DIN EN ISO 13934-1 >30 N 1/6 1
Trapezoidal Tear Resistance (MD) EN ISO 9073-4 >10 N 1/6 1
Trapezoidal Tear Resistance (XD) EN ISO 9073-4 >10 N 1/6 1
  •  According to EN 14325
  •  According to EN 14126
  •  According to EN 1073-2
  •  According to EN 14116
  •   According to EN 11612
  •  Front Tyvek ® / Back
  •  Based on test according to ASTM D-572
  •  See Instructions for Use for further information, limitations and warnings
  •  Larger than
  •  Smaller than
  •  Not Applicable
  •  Standard Deviation

GARMENT PERFORMANCE

PERMEATION DATA

COMFORT

PENETRATION AND REPELLENCY

BIOLOGICAL BARRIER

CLEANILESS

Warnings