Tyvek / Tychem® 2000 C Accessory

TCPS32TYL00

Tychem® 2000 C Accessory

DuPont™ Tychem® 2000 C Sleeve model PS32LA. Stitched and over-taped seams. Yellow.

 
 
 
Hover over image to zoom

CAT III

PB[3]

EN 14126

Name Description
Full Part Number TCPS32TYL00
Fabric / Material Tychem® 2000 C
Design Sleeve with elastics
Seam Stitched and over-taped
Color Yellow
Sizes 0
Quantity/Box 50 per box, bulk packed.

FEATURES & PRODUCT DETAILS

DuPont™ Tychem® 2000 C Sleeve model PS32LA. 50 cm long and with wide elastics at cuffs and upper arm. Available in yellow and in one size.
Specially designed for use with Tychem® apparel, Tychem® Accessories can help offer enhanced protection for body parts that are more exposed to hazardous substances.
Tychem® 2000 C garments and accessories utilise the strength of Tyvek® and a polymeric barrier coating to offer good permeation barrier protection against a wide range of inorganic chemicals and biological hazards (even under pressure).
Tychem® 2000 C is used for splash or pressurised splash protection in a variety of industrial environments, including pulp and paper manufacturing, food processing, chemical processing and pharmaceutical manufacturing.

  • Certified according to Regulation (EU) 2016/425
  • Partial body chemical protective clothing, Category III, Type PB [3-B]
  • EN 14126 (barrier to infective agents)
  • Antistatic treatment (EN 1149-1) - on inside; see footnotes
  • Stitched and over-taped seams with barrier tape for protection and strength

SIZES

ADDITIONAL EQUIPMENT NEEDED

Fabric & Permeation/Penetration Data

Physical Properties

Data relating to mechanical performance of the fabrics used in DuPont chemical protective clothing, listed for the selected garment according to the test methods and relevant European standard, if applicable. Such properties, including abrasion and flex-cracking resistance, tensile strength and puncture resistance can help in the assessment of protective performance.

Property Test Method Typical Result EN
Abrasion Resistance 7 EN 530 Method 2 >1500 cycles 5/6 1
Basis Weight DIN EN ISO 536 83 g/m2 N/A
Bursting Strength (Mullenburst) ISO 2758 475 kPa N/A
Colour N/A Yellow N/A
Exposure to high Temperature N/A Garments seams opens at ~98 °C N/A
Exposure to low Temperature N/A Flexibility retained down to -73 °C N/A
Flex Cracking Resistance 7 EN ISO 7854 Method B >5000 cycles 3/6 1
Flex Cracking Resistance at -30°C EN ISO 7854 Method B >500 cycles N/A
Puncture Resistance EN 863 >10 N 2/6 1
Resistance to water penetration DIN EN 20811 >30 kPa N/A
Surface Resistance at RH 25%, inside 7 EN 1149-1 < 2,5 • 109 Ohm N/A
Surface Resistance at RH 25%, outside 7 EN 1149-1 No antistatic treatment N/A
Tensile Strength (MD) DIN EN ISO 13934-1 >100 N 3/6 1
Tensile Strength (XD) DIN EN ISO 13934-1 >100 N 3/6 1
Thickness DIN EN ISO 534 180 µm N/A
Trapezoidal Tear Resistance (MD) EN ISO 9073-4 >10 N 1/6 1
Trapezoidal Tear Resistance (XD) EN ISO 9073-4 >10 N 1/6 1
  •  According to EN 14325
  •  According to EN 14126
  •  According to EN 1073-2
  •  According to EN 14116
  •   According to EN 11612
  •  Front Tyvek ® / Back
  •  Based on test according to ASTM D-572
  •  See Instructions for Use for further information, limitations and warnings
  •  Larger than
  •  Smaller than
  •  Not Applicable
  •  Standard Deviation

GARMENT PERFORMANCE

COMFORT

PENETRATION AND REPELLENCY

BIOLOGICAL BARRIER

Warning

PERMEATION DATA