Tyvek / Tyvek® IsoClean®

IC 501 B WH WS

Tyvek® IsoClean®

DuPont™ Tyvek® IsoClean® sleeve, model IC 501 B WH WS. Gamma-sterilized. Bound internal seams. Tunnelled elastication at wrist and bicep. Aseptically folded. White.

Hover over image to zoom


EN 14126

Option WS


Name Description
Full Part Number IC501BWHWS
Fabric/Materials Tyvek® IsoClean® TS-WS
Design Sleeve with tunnelled elastics
Seam Bound
Color White
Sizes 0
Quantity/Box 100 per box, individually packed in pairs. Subgrouped by 25 in an outer bag. 2 polyethylene liners. Cardboard box.


DuPont™ Tyvek® IsoClean® sleeve, IC 501 B WH WS. 45 cm long sleeve available in white and in one size. Gamma-sterilized. Bound seams. Tunnelled elastication at wrist and bicep.
Tyvek® IsoClean® delivers an ideal balance of protection, durability and comfort. Made of high density polyethylene using a patented flash spinning process Tyvek® IsoClean® provides an inherent barrier to particles, microorganisms and non-hazardous light liquid splash. Tyvek® IsoClean® is also breathable and low linting.
Tyvek® IsoClean® accessories (option code WS) have been sterilized by gamma- irradiation. They are folded to aid aseptic donning and packaged in an ISO class 5 cleanroom. All DuPont™ Tyvek® IsoClean® sterile accessories (option code WS) are packed in a dual barrier packaging system, consisting of an inner and outer easy tear cleanroom bag. The packaging system serves as a key element for contamination risk reduction when transferring apparel into clean areas. The accessories are individually packed and grouped together in an outer bag.
Garments and accessories made of sterile Tyvek® IsoClean® are typically used in cleanrooms within the hospital pharmacies, biotech, pharmaceutical, medical device manufacturing, food processing, cosmetics industry as well as in other critical or controlled environments.

*Provided that the number and sizes of particles measured per m3 of air inside the cleanrooms stay within the limits defined by the GMP Annex 1, respectively the ISO 14644-1.

  • Certified according to Regulation (EU) 2016/425
  • Partial body chemical protective clothing, Category III, Type PB [6-B].
  • EN 14126 (barrier to infective agents)
  • Sterilized by gamma-irradiation to SAL of 10-6 (ISO 11137-1).
  • Full traceability on all sterilized apparel with certificates of sterility available
  • Suitable for use in GMP class A/B (ISO Class 5) clean rooms*


Fabric & Permeation/Penetration Data

Physical Properties

Data relating to mechanical performance of the fabrics used in DuPont chemical protective clothing, listed for the selected garment according to the test methods and relevant European standard, if applicable. Such properties, including abrasion and flex-cracking resistance, tensile strength and puncture resistance can help in the assessment of protective performance.

Property Test Method Typical Result EN
Abrasion Resistance 7 EN 530 Method 2 >10 cycles 1/6 1
Basis Weight DIN EN ISO 536 41 g/m2 N/A
Charge Decay EN 1149-3 < 4s N/A
Flex Cracking Resistance 7 EN ISO 7854 Method B >100000 cycles 6/6 1
Puncture Resistance EN 863 >5 N 1/6 1
Resistance to water penetration DIN EN 20811 9 kPa N/A
Tensile Strength (MD) DIN EN ISO 13934-1 >30 N 1/6 1
Tensile Strength (XD) DIN EN ISO 13934-1 >30 N 1/6 1
Trapezoidal Tear Resistance (MD) EN ISO 9073-4 >10 N 1/6 1
Trapezoidal Tear Resistance (XD) EN ISO 9073-4 >10 N 1/6 1
  •  According to EN 14325
  •  According to EN 14126
  •  According to EN 1073-2
  •  According to EN 14116
  •   According to EN 11612
  •  Front Tyvek ® / Back
  •  Based on test according to ASTM D-572
  •  See Instructions for Use for further information, limitations and warnings
  •  Larger than
  •  Smaller than
  •  Not Applicable
  •  Standard Deviation






To access secured content from DuPont Please Sign In or Sign Up below