How to install Plantex® RootBarrier

Install Plantex® RootBarrier

Step 1

Dig a 70 cm deep hole. The diameter depends on the size of the plant.


Step 2

Install Plantex® RootBarrier vertically, green side to the roots. Make sure Plantex® RootBarrier is folded where the tape has been applied.


Step 3 

Fill approx. 2/3 of the hole with soil (depending on the plant size).

Crop your plant and fill up with soil leaving an overlap of 2 cm Plantex® RootBarrier above the surface.


Our warranty is not valid if passage of or contact with machines and/or equipment has taken place, for which our products are not suitable and which have resulted in a possible degradation of our products.