How to install Plantex® Cocomat

Step 1: Prepare the soil and rake if necessary

Ensure all weeds are thoroughly removed from the installation area before laying Plantex® Cocomat.

Step 2: Roll out Plantex® Cocomat

For large areas, overlap Plantex® Cocomat at least 10 cm to prevent weed growth along the edges. Use Plantex® Anchor Pins or Bio Pins to secure the joins. Apply at least 2 pins per running meter. On large unplanted areas weigh down Plantex® Cocomat with stones or with the new plants to ensure that no movement occurs whilst planting through.

Step 3: Cut an “X” shape in Plantex® Cocomat

Using sharp scissors or a knife, make the cut either over an existing plant or at the position where the new plant is to go. Work Plantex® Cocomat gently over existing plants or plant through with new ones.

Plantex® Cocomat does not need to be covered, since the product itself is already covered with the coconut fibre layer.

Our warranty is not valid if passage of or contact with machines and/or equipment has taken place, for which our products are not suitable and which have resulted in a possible degradation of our products.