Tyvek / Tychem® 6000 F Accessory

TFPL50TGY00

Tychem® 6000 F Accessory

DuPont™ Tychem® 6000 F Gown model PL50. Wrap-over rear closure with tie. Stitched and over-taped. Grey.

 
 
 
Hover over image to zoom

CAT III

PB[3]

EN 14126

Name Description
Full Part Number TFPL50TGY00
Fabric / Material Tychem® 6000
Design Gown with rear closure
Seam Stitched and over-taped
Color Grey
Sizes MD, 2X
Quantity/Box 25 per box, bulk packed.

FEATURES & PRODUCT DETAILS

DuPont™ Tychem® 6000 F Gown model PL50. Shin-length gown with wrap-over rear closure, hook and loop neck closure and waist ties. Elasticated wrists. Available in grey and sizes MD and 2X.
Specially designed for use with Tychem® apparel, Tychem® accessories can help offer enhanced protection for body parts that are more exposed to hazardous substances.
Tychem® 6000 F garments and accessories are made from a lightweight and durable fabric consisting of a proprietary barrier film laminated to a heavy duty Tyvek® substrate. They offer excellent chemical permeation protection to an extensive range of chemicals, helping to protect personnel against numerous toxic industrial organic chemicals, highly concentrated inorganic chemicals (even under pressure), particulates, biohazards and certain chemical warfare agents.
Tychem® 6000 F is used for a broad range of applications from chemical spill clean-up, emergency response, to military and petrochemical applications.

  • Certified according to Regulation (EU) 2016/425
  • Partial body chemical protective clothing, Category III, Type PB [3-B]
  • EN 14126 (barrier to infective agents)
  • Antistatic treatment (EN 1149-1) - on inside; see footnotes
  • Stitched and over-taped seams with barrier tape for protection and strength

SIZES

ADDITIONAL EQUIPMENT NEEDED

Fabric & Permeation/Penetration Data

Physical Properties

Data relating to mechanical performance of the fabrics used in DuPont chemical protective clothing, listed for the selected garment according to the test methods and relevant European standard, if applicable. Such properties, including abrasion and flex-cracking resistance, tensile strength and puncture resistance can help in the assessment of protective performance.

Property Test Method Typical Result EN
Abrasion Resistance 7 EN 530 Method 2 >2000 cycles 6/6 1
Basis Weight DIN EN ISO 536 120 g/m2 N/A
Bursting Strength (Mullenburst) ISO 2758 610 kPa N/A
Colour N/A Grey N/A
Exposure to high Temperature N/A Garments seams opens at ~98 °C N/A
Exposure to low Temperature N/A Flexibility retained down to -73 °C N/A
Flex Cracking Resistance 7 EN ISO 7854 Method B >1000 cycles 1/6 1
Flex Cracking Resistance at -30°C EN ISO 7854 Method B >1000 cycles N/A
Puncture Resistance EN 863 >10 N 2/6 1
Resistance to water penetration DIN EN 20811 >30 kPa N/A
Surface Resistance at RH 25%, inside 7 EN 1149-1 < 2,5 • 109 Ohm N/A
Surface Resistance at RH 25%, outside 7 EN 1149-1 No antistatic treatment N/A
Tensile Strength (MD) DIN EN ISO 13934-1 >100 N 3/6 1
Tensile Strength (XD) DIN EN ISO 13934-1 >100 N 3/6 1
Thickness DIN EN ISO 534 210 µm N/A
Trapezoidal Tear Resistance (MD) EN ISO 9073-4 >20 N 2/6 1
Trapezoidal Tear Resistance (XD) EN ISO 9073-4 >20 N 2/6 1
  •  According to EN 14325
  •  According to EN 14126
  •  According to EN 1073-2
  •  According to EN 14116
  •   According to EN 11612
  •  Front Tyvek ® / Back
  •  Based on test according to ASTM D-572
  •  See Instructions for Use for further information, limitations and warnings
  •  Larger than
  •  Smaller than
  •  Not Applicable
  •  Standard Deviation

GARMENT PERFORMANCE

COMFORT

PENETRATION AND REPELLENCY

BIOLOGICAL BARRIER

Warning

PERMEATION DATA