Tyvek / Tyvek® IsoClean®

IC 689 B WH TS

Tyvek® IsoClean®

DuPont™ Tyvek® IsoClean® hood IC 689 B WH TS with attached mask and ties. Individually double packed. Sterile. Aseptically folded. HOOD: Bound internal seams. Bound face opening. Ties for adjustable fit in the chest area. White. MASK: Pleated Polyethylene outer. 17.5 cm wide. Blue.

Hover over image to zoom


Name Description
Full Part Number IC689BWHTS
Fabric/Materials TYVEK® ISOCLEAN®
Design Hood with attached mask and ties
Seam Bound
Color Hood: white, mask: blue
Sizes 0
Quantity/Box 100 per box, individually double packed. 2 polyethylene liners. Cardboard box.


DuPont™ Tyvek® IsoClean® hood model IC 689 B WH TS with attached mask* and ties for adjustable fit in the chest area. Available in white and in one size. Gamma-sterilized and double bagged. Bound internal seams. Bound face opening for low particle shedding. Aseptically folded.
Tyvek® IsoClean® delivers an ideal balance of protection, durability and comfort. Made of high density polyethylene using a patented flash spinning process. Tyvek® IsoClean® provides an inherent barrier to particles, microorganisms and non-hazardous water-based light liquid splash. Tyvek® IsoClean® is also breathable and low linting.
Tyvek® IsoClean® TS accessories have been sterilized by gamma-irradiation. They are folded to aid aseptic donning and packaged in an ISO class 5 cleanroom. All DuPont™ Tyvek® IsoClean® sterile accessories (option TS) are packed in a dual barrier packaging system, consisting of an inner and outer easy tear cleanroom bag. The packaging system serves as a key element for contamination risk reduction when transferring apparel into clean areas. The accessories are individually double packed.
Sterile Tyvek® IsoClean® garments and accessories are typically used in cleanrooms within the biotech, pharmaceutical, medical device manufacturing, food processing, cosmetics industry as well as in other critical or controlled environments.

*The attached mask is a blue sterile cleanroom mask made out of pleated polyethylene outer layer having a width of 17.5 cm. Please note that it is not a PPE (e.g. not an FFP1, 2 or 3) mask.

  • Sterilized by gamma-irradiation to SAL of 10-6 (ISO 11137-1)
  • Full traceability on all sterilized apparel with certificates of sterility available
  • Suitable for use in GMP class A/B (ISO Class 5) clean rooms*
  • This accessory is not CE certified as chemical protective clothing


Fabric & Permeation/Penetration Data

Physical Properties

Data relating to mechanical performance of the fabrics used in DuPont chemical protective clothing, listed for the selected garment according to the test methods and relevant European standard, if applicable. Such properties, including abrasion and flex-cracking resistance, tensile strength and puncture resistance can help in the assessment of protective performance.

Property Test Method Typical Result EN
Basis Weight ASTM D3776 1.24 oz/yd2 ± 0.04 oz/yd2 STD DEV N/A
Breaking Strength - Grab (CD) ASTM D5034 18 lbf ± 2 lbf STD DEV N/A
Breaking Strength - Grab (MD). ASTM D5034 15 lbf ± 3 lbf STD DEV N/A
Burst Strength - Mullen. ASTM D774 42 psi ± 8 psi STD DEV N/A
Hydrostatic Head AATCC 127 80 cm H2O ± 16 cm H2O STD DEV N/A
Surface Resistivity (25°C / 55% RH) ASTM D257 (1081) <6.3 X109 ohms/square N/A
Wearing Apparel Flammability 16 CFR 1610 Class 1 N/A
  •  According to EN 14325
  •  According to EN 14126
  •  According to EN 1073-2
  •  According to EN 14116
  •   According to EN 11612
  •  Front Tyvek ® / Back
  •  Based on test according to ASTM D-572
  •  See Instructions for Use for further information, limitations and warnings
  •  Larger than
  •  Smaller than
  •  Not Applicable
  •  Standard Deviation



To access secured content from DuPont Please Sign In or Sign Up below