INFORMATION & IDEAS
PPA materials offer great resistance to hydrolysis and moisture and they are relied upon for cost effective applications such as water inlets/outlets, thermostat housings, water pumps and impellers
X-ray and metal detectable plastic resins provide excellent wear resistance and lubricity for improved longevity and reduced noise, high mechanical properties without reinforcement, and detectability for reliable contamination control.
DuPont has an understanding of the consumer electronics market gained through experience. This understanding helps DuPont work with designers, manufacturers and OEMs to develop materials for electronic devices that continue to address the challenges that the industry faces.
DuPont offers a wide range of heat resistant plastics to replace metal, ceramics and other polymers in uses from automotive engines to oil and gas production.
Delrin® properties of the Delrin® 100 series make it the premier resin of choice in the most demanding applications where the ultimate in toughness combined with high strength, creep and fatigue resistance are required.
Acetal gears made from Delrin®are a lightweight, low-friction alternative to metal, and an integral drivetrain part inan Lightweight Urban Vehicleproject at Bradley University.
Find out about the latest grades of Delrin® acetal resin with properties tailored for emerging market and application needs. Current features include low emission homopolymer grades and medium-high viscosity acetals.
DuPont materials help power today’s lower-cost, high-performance photovoltaic systems, from low friction bearings to flame-retardant module housings.
DuPont™ Delrin® provides the toughness, strength, and wear resistance properties required for solar tracker bearing applications to withstand weatherable conditions over long periods of time.
Rynite® offers a balance of thermal resistance combined with auto-extinguishibility and good mechanical properties for solar junction box applications and photovoltaic structural systems.
DuPont was the first company to commercialize a PA1010 polymer for the automotive market. Zytel® RSLC 1610 is a PA1010 specifically formulated to provide better thermal properties and chemical resistance to biodiesel fuel, compared with the materials it replaced.
For Vespel® Custom Parts, DuPont engineers work with part designers to customize the production method and material for desired end-use results. DuPont engineers may recommend fabricating a finished part from Authentic Vespel® stock shapes for prototypes, small quantities or complex geometries.
DuPont supports efforts/initiatives to improve sustainability in the automotive industry with high performance and renewably-sourced polymers that can help increase fuel efficiency while reducing energy loss, emissions and costs.
DuPont supports ideal production with high-performance polymers that can streamline cycle times, reduce costs, and help promote workplace safety.
DuPont materials and solutions help automakers control car manufacturing costs while meeting tough regulatory compliance guidelines.
DuPont is working with automakers to develop materials that help optimize engine efficiency. Focus areas include heat and friction management, exhaust gas recirculation, and re-imagining turbocharger technology or injection systems for mainstream vehicle production.
DuPont automotive solutions give automotive engineers a wide range of vehicle design options, including technologies for noise reduction, longer-lasting, more vibrant textiles, more sustainable air conditioning solutions, and more stylish LED systems.
Many of today’s vehicle system environments are like a pressure cooker of aggressive chemicals. Very few materials have the right combination of characteristics to withstand that kind of severe treatment. DuPont is at the forefront of the development of the latest generation of high performance materials.
Vehicle weight reduction is a major challenge. While plastics are inherently lighter than metals, lightweighting requires more than direct material substitution. DuPont predictive engineering and design teams work with customers, using insight and high-performance DuPont materials to redesign for lower weight, often integrating functions to cut costs at the same time.
As alternative drive vehicles evolve, the challenges only multiply. DuPont is working with automotive manufacturers to help them improve efficiency and range in today’s hybrid and electric vehicles, and further the development of the fuel-cell powered vehicles of tomorrow.
DuPont is working with our auto industry collaborators to help them develop the next generation of sustainable mobility solutions. Together, we’re helping reduce dependence on fossil fuels and lower greenhouse gas emissions to help manage the environmental impact associated with the world’s increasing demand for automotive mobility.
DuPont vehicle safety solutions help increase safety across the whole automotive value chain, from employee safety on the production floor to driver and passenger safety on the road.
Long-term molding trials at the DuPont European Technical Center in Geneva, as well as extensive customer collaboration, have proven the process flexibility of the new Crastin® HR HFS products versus the existing PBT HR grades on the market.
Crastin® SF resins are tailored to reduce your molding cycle time with superior flow properties that enable filling of the mold at lower melt temperatures.
At-a-glance guide to DuPont polymer properties and application development opportunities.
Examples of innovative plastic design solutions created by DuPont, in collaboration with customers worldwide.
Zytel® Plus is helping automakers reduce weight and integrate parts in powertrain systems, making vehicles lighter, more fuel efficient and helps to reduce total system costs.
DuPont™ Hytrel® has provided durable performance in over a billion automotive CV joint boot applications over the last 25 years.
DuPont is collaborating to help establish guidelines for communicating the environmental benefits of renewablysourced plastics.
DuPont™ Vespel® parts and shapes and DuPont™ Delrin® acetal resin are high-strength, low-friction mechanical plastics that deliver performance for automotive, consumer, and industrial applications.
Low friction plastic applications developed in collaboration with DuPont experts can help improve durability and performance, reduce maintenance, and can even contribute to reduced use of fossil fuels.
DuPont has the industry’s widest range of UL-approved electrical insulation system (EIS) materials for encapsulation, coil forms, and other electrical and electronics uses.
DuPont offers the industry’s broadest portfolio of non-halogenated, flame retardant polymer grades and families to fit the needs of your application.
Look to DuPont for a comprehensive range of engineering thermoplastics to help meet your needs for rugged, economical components of material handling systems. Components include conveyor chains, belts, side rails, rollers, grippers, bumpers and more.
Zytel® PLUS nylon has the ability to retain properties after heat aging or long term exposure to hot oil and hot water, allows longer part service time, better reliability, and invites more opportunity to replace costly metals or specialty polymers to reduce part cost and lower mass.
DuPont has been working on PA12 alternatives and has established global development and supply teams to work with customers to quickly qualify alternative materials for use in many automotive and industrial components.
DuPont polymer technology and applications capability are helping to make faster, more reliable, more efficient connections possible in the mobile technology, office automation and energy industries worldwide.
DuPont biopolymers and material science are helping to enable innovative plastic design, from award-winning furniture to advanced medical devices.
DuPont collaborates with customers worldwide to develop innovative metal replacement applications to make cars, planes and other equipment more fuel- and cost-efficient.
The use of engineering thermoplastics in automotive components has grown significantly over the last 25 years with many new applications in powertrain, electrical components, chassis, trim components and other vehicle areas.
Molding guide for Zytel® HTN family of resins, which are based on similar, but structurally different semicrystalline, partially aromatic polyamide copolymers.
DuPont Performance Polymers offers a portfolio of Special Control (SC) and Premium Control (PC) grades of plastic. These grades are used in the manufacturing of components across various healthcare segments.
DuPont Performance Polymers brings global knowledge to local application development at innovation center facilities located in Europe, Asia and the Americas.
DuPont discoveries have continually reshaped the plastics industry, from Neoprene to Nylon, to a series of innovative plastics, including the high-performance, renewably-sourced choices available today.
From material selection to tolerances, the Plastic Design Guide details 10 top tips for effective design, efficient production, and successful products.